Rotary excavator Wire Rope Maintenance

Rotary excavator Wire Rope must be often lubricated, it is best to use high viscosity oil to reduce or reduce the wear of steel rope and pulley wheel grooves and drum grooves. The rotary excavator is generally in the field operation, so in the open environment, the surface grease of the wire rope often can be stained with soil, stone sand and so on. Once stuck to these objects, the wear of the wire rope www.wirerope-sling.com and the wheel groove will be aggravated, so it is necessary to clean and lubricate the surface of the wire rope in time.

The wire rope is a consumable product. In the longtime wear, bending, torsion, corrosion and other working conditions, the surface steel wire is most easily broken. In fact, sometimes the internal extrusion is easy to break off the wire. These are often easily ignored by the staff. Therefore, it must be paid enough attention. When a lot of steel wire is broken or a few strands begin to break, it is necessary to consider replacing the wire rope. When the wire rope is partially concave-convex and so on, it is the precursor of the wire rope disintegration. It is necessary to consider the change of wire rope when a section of the wire rope is torsional especially, and there are many broken wires outside the wire rope. It must be considered to change the rope immediately; and so on.

Therefore, in the construction of Rotary excavator Wire Rope, it must be strictly carried out according to the operating rules, fully maintain and maintain, maximize the potential use and service life of the wire rope, reduce the cost, safety construction, and improve the efficiency.